﻿PerfCheck 0.9.0 (2) for Windows
https://www.atelier-flare.com/

==============================================================
日本語
==============================================================

PerfCheck は、デスクトップの端に常駐させる小型のパフォーマンスモニターです。
時刻・CPU（全体とコア別）・GPU・メモリ・ネットワーク・ディスクを 1 秒ごとに表示します。
モニター自身が PC の負荷にならないよう、軽い計測方法だけを使っています。

■ 動作環境
  Windows 11（x64）

■ 使い方
  1. zip を好きなフォルダに展開し、PerfCheck.exe を実行します。
     インストールは不要です。
  2. 初回は「Windows によって PC が保護されました」と表示されることがあります
     （コード署名をしていないためです）。[詳細情報] → [実行] で起動できます。
  3. カードを右クリックすると、最前面 / 最背面の切り替え、設定、終了ができます。
     カードの上にマウスを置くと、右上に設定とピンのボタンが出ます。
  4. カードの上で Ctrl + マウスホイールを回すと、表示倍率を変えられます。
  5. 通知領域（タスクバー右下）のアイコンをクリックすると、カードを画面内に呼び戻します。
     アイコンが見えないときは、タスクバー右下の「^」の中にあります。

■ アンインストール
  1. 設定で「Windows の起動時に自動的に起動」をオンにしていた場合は、オフにします。
  2. カードを右クリック → [PerfCheck を終了] で終了し、展開したフォルダを削除します。
  3. 設定とログは %LOCALAPPDATA%\PerfCheck にあります。不要なら削除してください。

■ 通信について
  新しいバージョンの有無を確かめるため、起動時と 24 時間ごとに
  https://www.atelier-flare.com/perfcheckwin/version.json を取得します。
  それ以外の情報を送信することはありません。

■ 著作権・ライセンス
  (c) 2026 flare
  本アプリはサードパーティ製ソフトウェアを同梱していません。
  Windows 標準の機能だけで構築されています。

==============================================================
English
==============================================================

PerfCheck is a tiny performance monitor that sits at the edge of your desktop.
It shows the clock, CPU (overall and per core), GPU, memory, network and disk
every second, using only lightweight measurement APIs so the monitor itself
doesn't load your PC.

- Requirements
  Windows 11 (x64)

- Getting started
  1. Extract the zip to any folder and run PerfCheck.exe. No installation needed.
  2. Windows may show "Windows protected your PC" the first time, because the app
     isn't code-signed. Click [More info] -> [Run anyway] to start it.
  3. Right-click the card to switch between always-on-top and desktop mode,
     open Settings, or exit. Hover over the card to show the Settings and pin buttons.
  4. Hold Ctrl and scroll the mouse wheel over the card to change the display scale.
  5. Click the notification area icon to bring the card back into view. If you
     can't see the icon, look under the "^" at the right end of the taskbar.

- Uninstall
  1. If you turned on "Start when Windows starts", turn it off in Settings.
  2. Right-click the card -> [Exit PerfCheck], then delete the extracted folder.
  3. Settings and logs are in %LOCALAPPDATA%\PerfCheck. Delete it if you no longer need it.

- Network access
  To check for new versions, PerfCheck downloads
  https://www.atelier-flare.com/perfcheckwin/version.json when it starts and
  every 24 hours. It sends no other information.

- Copyright and license
  (c) 2026 flare
  This app contains no third-party software. It's built only with standard
  Windows components.
